You can purchase online or Whatsapp us on 016-2185122
LED Sensor Light
LED Sensor Light
Sort by
Show result

Instant-on sensor activated security light.

The SmartBright LED Security light is a PIR motion sensor activated twin head security light. With a wide detection range, brighter light output and instant-on LED technology, you can be assured your property is well lit for visibility at night.

Key features include:

  • Low power usage - 2 x 15W LED spot lights (for a total 30W power usage)
  • Customise to your needs - adjustable beam angle and "on" time
  • High brightness - 4,000K colour temperature and 2,000 lumen light output
  • Long lifetime - up to 30,000 hours operating time
  • Outdoor rated - IP54 outdoor rating
  • Manual override - more details below






LED Sensor Light Manual Override Feature

With this Philips LED motion sensor, you can override the automatic operation and keep the lights on regardless of motion detection.

To enable this "Manual Override" mode, first ensure that the lights are switched on and then flick the wall switch off and on twice (off-on, off-on) within 8 seconds. The interval between the first and second operation must be within 0.5 - 2 seconds.

In Manual Override mode, the lights will remain on for around 5 hours. After 5 hours the lights will turn off and the motion sensor will revert to Automatic Operation.

Users can also manually set the motion sensor back to Automatic Operation by:

1) Turning the wall switch off and on twice within 8 seconds, or

2) Switch the light off for at least 10 seconds and then turning it back on.


Product data
General Information
Light source color 865 cool daylight
Light source replaceable No
Number of gear units 1 unit
Driver included Yes
Optical cover/lens type -
Luminaire light beam spread 120°
Control interface -
Connection Push-in connector 6-pole
Cable -
Protection class IEC Safety class I
Flammability mark For mounting on normally flammable
CE mark CE mark
Constant light output No
Number of products on MCB of 16 A type B 20
Light source engine type LED

Operating and Electrical
Input Voltage 100 to 240 V
Input Frequency 50 or 60 Hz
Inrush current 5.25 A
Inrush time 0.0405 ms
Power Factor (Min) 0.9

Controls and Dimming
Dimmable No

Mechanical and Housing
Housing Material Metal–Plastic
Optical cover/lens material Polycarbonate
Mounting device Baseplate
Optical cover/lens shape Curved
Optical cover/lens finish Frosted
Overall length 242 mm
Overall width 171 mm
Overall height 168 mm
Color black

Approval and Application
Ingress protection code IP54 [ Dust accumulation-protected, splashproof]

SmartBright LED Security Light

Mech. impact protection code IK05 [ 0.7 J]

Initial Performance (IEC Compliant)
Initial luminous flux (system flux) 2200 lm
Luminous flux tolerance +/-10%
Initial LED luminaire efficacy 73 lm/W
Init. Corr. Color Temperature 6500 K
Init. Color Rendering Index >80
Initial chromaticity SDCM<7
Initial input power 30 W
Power consumption tolerance +/-10%

Application Conditions
Ambient temperature range -20 to +40 °C
Maximum dim level Not applicable

Product Data
Full product code 911401712692
Order product name BWS220 LED20/CW PSU 100-240V
Order code 911401712692
Numerator - Quantity Per Pack 1
Numerator - Packs per outer box 8
Material Nr. (12NC) 911401712692
Net Weight (Piece) 0.680 kg